Just-in-time access: privileges only for the duration of the task

All Posts

Remote Access

9 min

 read

Just-in-time access in PAM: how JIT access works

Just-in-time access grants privileged rights only for the duration of a task and revokes them automatically afterwards. How JIT access works in PAM, the models available and how to introduce it.

Jan Zeppernick - Amitego CEO

Jan Zeppernick

Management

Published

05 Nov 2024

Aktualisiert

17 Nov 2026

Introduction

In many organisations, administrators and service providers hold their rights around the clock, even if they only need them a few hours a month. Every one of these permanently privileged accounts is a target for attackers. Just-in-time access (JIT) reverses the principle: privileges are created only when needed and disappear automatically once the task is done.

This article explains what just-in-time privileged access means in privileged access management (PAM), how a JIT access works, which models exist, how JIT differs from zero standing privileges and how to introduce it step by step.

Key Takeaways

  • Just-in-time access grants privileged rights only on request, for one system and one time window, and revokes them automatically afterwards.
  • Permanent admin rights sit unused most of the time but can be abused at any moment.
  • There are three models: temporary elevation, ephemeral accounts and brokered access through a gateway.
  • JIT is the way; zero standing privileges is the goal.
  • ISO 27001 (control 8.2) and NIS2 require restricted, provable privileged access, which JIT delivers.

What is just-in-time access?

Just-in-time access is an approach in which privileged rights are not granted permanently but on request, for a specific system and a limited time window. When the window closes or the session ends, the rights are revoked automatically. JIT is therefore the principle of least privilege applied to time: not only as few rights as necessary, but for as short a time as necessary.

Why permanent admin rights are a risk

Permanently assigned privileges, often called always-on rights, create a large attack surface that sits unused most of the time. If such an account is compromised, for example through phishing or a stolen password, the attacker has full rights immediately. Add accounts that were never removed after a project ended or someone left, and shared admin accounts whose use cannot be tied to a person. JIT reduces these risks because, most of the time, there are simply no privileged rights to abuse.

How a just-in-time access works: request, approval, session, revocation

How a just-in-time access works

  1. Request: an administrator or service provider requests access to a specific system, with a reason and the time window needed, for example referencing a ticket.
  2. Approval: depending on the rule, approval is automatic, for routine tasks in a maintenance window for instance, or four-eyes by a responsible person.
  3. Session: access runs through a controlled access point, time-limited and recorded. Credentials are injected automatically and never disclosed.
  4. Revocation: when the time window ends, the session ends and the rights expire automatically. What remains is the evidence of who did what and when.

Three models for JIT in PAM

Temporary privilege elevation

An existing account receives additional rights for a limited time, such as membership of an admin group. It is simple to implement, but the account itself remains permanently.

Ephemeral accounts

A privileged account is created for each session and deleted afterwards. This comes closest to having no standing privileges, but is not possible on every target system.

Brokered access through a gateway

The user receives no rights on the target system, only approval for a session through the access gateway. The gateway injects the privileged credentials in the background, so the user never knows them. This model also works for systems where rights cannot be assigned dynamically, such as legacy servers or OT components, and suits external service providers particularly well.

Just-in-time access and zero standing privileges

Zero standing privileges (ZSP) describes the goal: no permanent privileged rights in day-to-day work. Just-in-time access is the way there, the process by which rights appear when needed and disappear again. Our article zero standing privileges describes the target state in detail.

Challenges when introducing JIT

  • Emergencies: during an incident, an approval process must not slow things down. A defined emergency access is needed that works immediately and is fully recorded.
  • Automation and service accounts: scripts and services often need permanent rights. They belong in a vault with regular password rotation rather than in a JIT flow designed for people.
  • Acceptance: if JIT delays every action, administrators look for workarounds. Rules for automatic approval of routine tasks keep the flow fast.

Best practices for JIT access

  1. Start with the most critical access: domain admins, database admins, OT and external service providers.
  2. Set default time windows, for example two to four hours, and allow extensions only with a reason.
  3. Use four-eyes approval for especially critical systems and automatic approval for routine work.
  4. Record every JIT session so that approval and activity can be proven together.
  5. Regularly review which permanent rights still exist and remove them step by step.

Our six-phase PAM roadmap shows how JIT fits into a wider PAM project.

JIT and compliance

Regulations increasingly require exactly what JIT delivers. ISO/IEC 27001:2022 requires, in control 8.2, that privileged access rights be restricted and managed. Under NIS2, section 30 of Germany's BSI Act requires access control and multi-factor authentication. Cyber insurers are also asking more often how privileged accounts are protected. With JIT, you can prove for every privileged access who requested it, who approved it and what the user did.

Just-in-time access with VISULOX

VISULOX implements JIT using the brokered access model. Users request a session for a specific system, approval is automatic or four-eyes, and access ends when the time window closes. Credentials sit in a vault and are never disclosed, and every session is recorded and can be watched live. This works agentlessly for RDP, SSH, VNC and web applications, for internal administrators and external service providers alike. See zero trust with VISULOX for the approach, and VPN for remote maintenance: downsides and alternative for how JIT enables remote maintenance without VPN.

Contact

Your Direct Path to Secure Remote Access

Speak directly with a cybersecurity expert.

Personal Meeting
Personal Meeting
Personal Meeting

Conclusion

Just-in-time access replaces permanent admin rights with rights that exist only for one task, one system and one time window. That shrinks the attack surface, ties every privileged session to a person and a purpose, and provides the evidence ISO 27001 and NIS2 require. Start with the most critical access, handle emergency access and service accounts properly, and automate routine approvals, and you move step by step towards zero standing privileges without slowing operations down.

Frequently Asked Questions

What does just-in-time access mean?

Just-in-time access means privileged rights do not exist permanently but are granted on demand for a specific system and a limited time window, then revoked automatically. Most of the time there are no rights an attacker could abuse.

What is the difference between JIT and zero standing privileges?

Zero standing privileges is the goal: no permanent privileged rights. Just-in-time access is the process that achieves it, by creating rights when needed and removing them again.

Does just-in-time access slow administrators down?

Not if the rules are set well. Routine tasks can be approved automatically, and only critical systems need four-eyes approval. A defined emergency access covers incidents.

Is JIT suitable for external service providers?

Especially so. Service providers get access only to the system they maintain, only in the agreed time window and without knowing the credentials. Every session is recorded, and access expires automatically when the task ends.

Jan Zeppernick - Amitego CEO

Jan Zeppernick

Management

Jan has over 12 years of consulting experience at PwC and Ernst & Young, focusing on information security and compliance for critical infrastructure and the automotive industry. As a certified ISO 27001 Lead Auditor and strategy expert, he advises organizations on establishing and auditing security management systems in accordance with ISO 27001 and TISAX.