IT security for energy suppliers: NIS2, EnWG and secure remote maintenance

All Posts

Remote Access

10 min

 read

IT security for energy suppliers: NIS2, EnWG and the KRITIS umbrella act

Germany's NIS2 act, EnWG sections 5c to 5e and the KRITIS umbrella act: the 2026 obligations for energy suppliers and five key points for privileged access and remote maintenance.

Jan Zeppernick - Amitego CEO

Jan Zeppernick

Management

Published

11 Oct 2025

Aktualisiert

17 Nov 2026

Introduction

Municipal utilities, grid operators and generators in Germany face more regulation in 2026 than ever. The NIS2 implementation act has applied since 6 December 2025, the IT security duties for grid and plant operators now sit in sections 5c to 5e of the Energy Industry Act (EnWG), and the KRITIS umbrella act has been in force since 17 March 2026. For IT security at energy suppliers that means more obligations, more evidence and personal accountability for management.

One topic runs through all three: access to critical systems. This article sorts out the obligations and sets out five key points for securing privileged access and remote maintenance in a way you can prove in an audit.

Key Takeaways

  • Germany's NIS2 implementation act has applied since 6 December 2025; section 30 BSIG requires access control, MFA and supply chain security, among other things.
  • IT security duties for grid and plant operators now sit in sections 5c to 5e EnWG and are detailed in Federal Network Agency IT security catalogues.
  • The KRITIS umbrella act has been in force since 17 March 2026 and adds physical resilience.
  • Common denominator: access to critical systems must be limited, controlled and provable.
  • Five key points: control third-party access, isolate OT, no permanent admin rights, record sessions, define emergency access.

Why energy suppliers are under particular scrutiny

Energy supply underpins every other sector. If electricity, gas or heat fail, hospitals, water supply and communications stop. At the same time, suppliers' IT and OT landscapes are complex: control systems, telecontrol, smart meter infrastructure, billing systems and many manufacturers and service providers maintaining systems remotely. Each of these access paths can lead to systems whose failure reaches far beyond the company itself.

Three regulations that apply in 2026

NIS2 implementation act and the BSI Act

Germany's NIS2 implementation act has applied since 6 December 2025 without a transition period. In-scope organisations had to register with the BSI by 6 March 2026. Section 30 of the BSI Act (BSIG) requires risk management measures including access control, multi-factor authentication and supply chain security. Section 32 BSIG sets out reporting obligations for significant incidents. Management must approve the measures and oversee their implementation. Our NIS2 checklist gives an overview.

EnWG sections 5c to 5e and the IT security catalogue

Energy supply networks and energy installations are additionally covered by energy-sector rules. The NIS2 implementation act moved the former provisions of section 11 EnWG into the new sections 5c to 5e EnWG. The Federal Network Agency (Bundesnetzagentur), in agreement with the BSI, defines what adequate protection means in IT security catalogues. Until new determinations are issued, the existing catalogues for grid and plant operators continue to apply. At their core is a certified information security management system.

KRITIS umbrella act

The KRITIS umbrella act (KRITIS-Dachgesetz) has been in force since 17 March 2026. It adds physical resilience to cybersecurity: operators of critical facilities must assess risks, implement resilience measures and register. Thresholds and registration details are set out in a separate ordinance. Access to facilities, physical and logical, plays a role here too.

NIS2, EnWG and KRITIS umbrella act: obligations for energy suppliers in 2026

Five key points for privileged access in the energy sector

1. Control service provider and manufacturer access

In the energy sector, external partners often maintain more systems than in-house staff. Every manufacturer and service provider access needs a personal identity, approval for exactly the target system and a time window. Our article third-party access at utilities shows what this looks like in practice.

2. Separate control systems and OT

Control and telecontrol systems belong in isolated zones. Remote access should not lead straight into these zones but through a controlled access point that approves individual systems only. A classic VPN that opens a whole segment does not fit. Our article VPN for remote maintenance: downsides and alternative explains why, and remote maintenance in OT under BSI IND.3.2 summarises the BSI requirements for OT.

3. No permanent admin rights

Permanent administrator rights granted by default are one of the biggest risks. Just-in-time approvals that apply only for the duration of a task and then expire automatically are better. Our article just-in-time access in PAM explains how.

4. Make every session provable

Auditors, the Federal Network Agency and the BSI expect evidence. A log that only shows logins rarely suffices. Tamper-proof session recording proves what actually happened during access to control or billing systems and supports incident reporting under section 32 BSIG. See audit and compliance with VISULOX.

5. Plan emergency access

During an incident, people have to act fast, at night and without the usual approval path. A defined emergency access with dedicated accounts, review afterwards and full recording prevents passwords being shared or safeguards being bypassed when it matters.

How VISULOX supports energy suppliers

VISULOX is a remote PAM solution from Germany that routes privileged access by internal administrators and external service providers through one central access gateway. It runs on-premises, needs no agents on target systems and supports RDP, SSH and VNC as well as web applications. Approvals are just-in-time or four-eyes, and every session is recorded and can be watched live and terminated. Our case studies include the gas transmission operator Thyssengas. Why running PAM in-house is usually the better choice for critical infrastructure is covered in PAM on-premises or cloud. See also OT & critical infrastructure.

Contact

Your Direct Path to Secure Remote Access

Speak directly with a cybersecurity expert.

Personal Meeting
Personal Meeting
Personal Meeting

Conclusion

In 2026, German energy suppliers face three regulations in parallel: the NIS2 implementation act with the BSI Act, the energy-sector duties in sections 5c to 5e EnWG, and the KRITIS umbrella act. Their common denominator is controlled access to critical systems. Bundle service provider and manufacturer access, isolate OT, remove permanent admin rights, record every session and define emergency access, and you meet a large part of the requirements and can prove it in an audit. (This article does not constitute legal advice.)

Frequently Asked Questions

Which energy suppliers fall under NIS2 in Germany?

Companies in electricity, gas, district heating, oil and hydrogen that meet the size and turnover thresholds fall under NIS2, as do operators of critical facilities regardless of size. Many municipal utilities are covered. Whether a company is in scope should be checked against the BSI Act and the BSI's guidance.

What does section 5c EnWG regulate?

Section 5c EnWG requires operators of energy supply networks and energy installations to adequately protect their IT and telecommunications systems. The Federal Network Agency, in agreement with the BSI, defines what is adequate in IT security catalogues. It replaces the former paragraphs of section 11 EnWG.

What is the difference between NIS2 and the KRITIS umbrella act?

NIS2 and the BSI Act govern cybersecurity. The KRITIS umbrella act governs the physical resilience of critical facilities, such as protection against sabotage, natural events or outages. Operators of critical facilities usually have to meet both.

How do energy suppliers secure remote maintenance by manufacturers?

With a central access point instead of direct VPN access: personal accounts with MFA, approval only for the specific target system and time window, session recording with live view, and automatic revocation when the task ends. Remote PAM solutions such as VISULOX implement exactly this flow.

Jan Zeppernick - Amitego CEO

Jan Zeppernick

Management

Jan has over 12 years of consulting experience at PwC and Ernst & Young, focusing on information security and compliance for critical infrastructure and the automotive industry. As a certified ISO 27001 Lead Auditor and strategy expert, he advises organizations on establishing and auditing security management systems in accordance with ISO 27001 and TISAX.